Icecafe’s Weblog

Whatever we want…

Install Windows XP in SATA drives solution

Posted by icecafe on February 8, 2008

I have met this problem and searched for some solutions in the Internet as follows.

1. Problem description:

One of the most popular topics among our readers is installing Windows XP on your new Windows Vista computer – sometimes for compatibility reasons, but also because a lot of people just don’t like Vista very much.

The problem that people keep running into left and right is getting to the point where XP starts to install and getting the message “Setup did not find any hard disk drives installed in your computer”. This error happens because your new computer has a storage controller that isn’t supported natively in XP, usually an SATA (Serial ATA) controller.image

Everyone is so used to IDE drives being auto-detected during install, that people naturally assume the same thing will happen with SATA drives, which can’t be further from the truth. SATA and SAS drives are closer to SCSI in reality, and thus will require their own drivers to be recognized by Windows XP, because the XP kernel predates when SATA drives were available. Vista addresses this issue and sees the SATA drives just fine because it has the drives built in already. The same problem existed back then on NT systems, where you had to push F6 to get it to see SCSI drives.

2. Solutions:

2.1 If you don’t have a floppy drive in your computer (who does anymore), then you’ll need to use a process called slip-streaming to integrate the storage drivers into your XP installation CD.

It should go without saying that this is an advanced topic, so proceed with caution.

Creating a Custom XP Install

We’ll use a software called nLite to create a new XP install cd, so you’ll first need to download and install it. Once it starts up, you’ll be prompted for your Windows installation, so you’ll want to click the Browse button.

image

First you’ll be prompted for the “Windows installation”, which really means your XP install CD. Find it and select the root of the installation, and then click OK to go to the next dialog.

image

Next you’ll be prompted on where you want to save the temporary files used during the slip-streaming process. I chose to create a new directory and called it XPISO, but you can put it wherever you’d like. I just recommend to use a new directory.

image

nLite will copy all the necessary files off the XP installation and into the temporary folder. When it’s done, you’ll see all the information on which version it is.

image image

Hit the next button until you come to this screen, where you can select what options you want. Select “Drivers” and then “Bootable ISO”.

image

Side note: You can select any of the other options if you’d like. nLite will let you bundle updates, set tweaks or automatically remove components from the installation, but that all goes beyond the scope of this article.

Hit the next button until you get to the screen for selecting drivers. If you click the Insert button, you can choose between adding a single driver or adding a folder of drivers. Since we’ll just be loading a single driver, you can choose that option, but you might want to first read the section below about finding drivers for XP.

image image

Browse to the directory where you extracted the driver files, and then select Open. Note that it doesn’t really matter which of the *.inf files you choose, because it will select all files in the folder anyway.

image

nLite will prompt you to select your driver. If you don’t know which exact one it is, you can either use Device Manager in Vista to find the exact model, or you can just select all of them. Just be careful not to select a 64-bit driver if you are using 32-bit, or the wrong OS version.

image

I would recommend including both Storage and Network drivers, as those are the most common drivers that are missing in XP. image

Once you proceed to the next screen, now we can finally finish the process. You can choose to directly burn the cd here, or you can select Create Image to create an ISO file that you can burn to a CD using whatever burning tool you have.

Note: If you chose to create an ISO, make sure to use the “Make ISO” button before you click Next.

imageimage

 

 

 

At this point you can burn the ISO image to a CD, and then start your XP installation process.

Finding Drivers for XP

The best place to search for drivers for your hardware is at the manufacturer’s support website. The only problem is that almost every manufacturer seems to distribute their drivers in floppy disk image form, even though the computer they are for doesn’t have a floppy drive. Guess nobody has alerted them to get with the program.

We can still extract the drivers using an application called WinImage. Let’s run through a quick example… Here you can see the Intel SATA controller driver for my HP computer.

image

I downloaded and ran the executable, which extracted a file called f6flpy32.exe into a temporary directory. Don’t bother trying to run this one, because it’ll just prompt you for a floppy drive.

image

So how to get the drivers out of this file? There are a few options that you can try, depending on how the manufacturer packed the files.

  • You can use Winimage to extract them, which is a shareware software, but you can use it during the trial period for free.

  • You can try and use WinRar to extract the file. In many instances this will extract a *.flp file, which you can mount in a VMware virtual machine or potentially with some ISO mounting software.

  • Some drivers will allow you to automatically extract into a directory. You’ll have to try it and see what happens.

  • Other methods? If you’ve got other ideas, leave them in the comments and I’ll add them to this list.

Here’s the list of files that Winimage can handle, which is quite a lot.

image

Start WinImage and then open the file, and you should see the contents. Just extract them to a folder, preferably with a useful name so you can remember it later.

image

Good luck with your installation, and be sure to leave any support questions on the forum.

Download WinImage from Winimage.com

Download nLite from nliteos.com

2.2 If you have a floppy drive in your compute, you can do similarly as a solution for Toshiba SATA driver:

http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1128070

ISSUE

Microsoft Windows does not — as of October 2005 — have built-in support for Serial ATA (SATA) controllers and hard disk drives. This includes Windows XP (with or without SP1 or SP2) and Windows 2000. To install Windows on Toshiba computers with Serial ATA drives, it’s necessary to install the Toshiba RAID driver / Serial ATA driver during the Windows installation process.

RESOLUTION

Follow the procedure below to install Windows XP or Windows 2000 on a Toshiba computer with a Serial ATA hard disk drive. Windows can install the required driver only from a diskette drive. If the computer does not have an internal or external diskette drive, then Windows 2000 or Windows XP may be installed from the Recovery CD or DVD that’s packaged with the computer.
1. Click the following link to download the Toshiba RAID Driver / Serial ATA Driver.
2. Extract the seven driver files from the ZIP package to a folder on your desktop.
3. Copy the seven driver files to a blank diskette. Once the files have been copied, eject the diskette from the drive.
4. Insert the Windows XP or Windows 2000 CD into the computer’s CD drive and restart the computer.
5. Watch carefully, as the Windows installation progresses, and carefully read the text at the bottom of each screen. At the Windows Setup Screen (typically the second screen after installation starts) this message should appear at the bottom of the screen: “Press F6 if you need to install a third party SCSI or RAID driver.”
6. Press the F6 key.
7. At the next screen, press S to specify an additional device.
8. Insert the diskette containing the Toshiba RAID driver / Serial ATA driver. Leave this diskette in the drive during the entire Windows installation process, as it will be accessed several times.
9. When prompted to select a driver from the provided list, choose “Toshiba RAID Driver (Windows XP/2000)”. When messages appear regarding Windows Logo testing, click the Yes button to continue.
Once the driver has been installed, Windows will recognize the computer’s SATA hard drive.
10. Continue installing Windows XP or Windows 2000.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s

 
%d bloggers like this: